Performance Products

Lock Differential Posi Spool, Slash 4X4

Optional, differential spool for the Traxxas Slash 4x4. This is located in the differential case, and can be used front or rear to eliminate the differential action. This part is recommended for off-road use only. FEATURES: Steel shaft and 6061 aluminum...

Steel 76T 48P Spur Gear Slash, Blue

Optional light weight 76T Metal Spur Gear for the 1/10 scale Traxxas electric Stampede, Rustler, and 2WD Slash series trucks. FEATURES: CNC Light Weight Hardened steel construction Replaces stock nylon spur gear YOU WILL RECEIVE: 76T Metal Spur Gear...

Heavy Duty Steel Bevel Gear Set, 8 Tooth Pinion, 27 Tooth

This is the Hot Racing 27T/8T HD 0.9 Module High Pinion Bevel Gear Set. Included:One 8T Bevel GearOne 27T Bevel GearFeatures:Compatible with Axial AR44 axles Hardened steel for increased strength Provides over drive for the front axleCompatible with...

34T Steel 32p Pinion Gear 5mm Bore

Hot Racing hardened steel 34tooth, 32 pitch pinion gear for motors with a 5mm shaftIncluded:- One (1) pinion gear- One (1) M5x5mm setscrewComment:0.8 module is the same as 32 standard pitchFeatures:CNC machinedHardened steel to increased wear resistance...

6061 Front Upper Suspension Arms, fits Mini Maxx

Hot Racing aluminum Front Upper suspension arms for the TRA Mini Maxx.COMMENTS:Replaces TRA10731 Front Upper suspension armsIncludes:One (1) left Front Upper suspension armOne (1) right Front Upper suspension armRequirements:InstallationMedium thread...

Aluminum Lock Servo Arm, 2 Hole, M3 Mount, 25 Tooth

Hot Racing double clamp lock double arm servo arm for Futaba, Savox, or Traxxas servos.Features:Double lock clamp to give precise fit to lock on to the servo spline. CNC 6061 aluminum construction, anodized black in colorFor: 25 spline standard size...

Unibody Super Heavy Duty Differential Lock, Ax10

Optional unibody super heavy duty differential locker. FEATURES: Construction: CNC #45 steel YOU WILL RECEIVE: Heavy duty differential locker (does NOT comes with gear) four mounting screws REQUIREMENTS: installation NOTE: gear in photo is NOT included

Steel Center Drive Shaft, SCX

Optional Steel Main Center Drive shafts for SCX10, AX10, Wraith, or Tamiya CC01 FEATURES: Light weight and CNC Machined from solid billet carbon steel Heat treatment Black finish Super smooth operation Shaft travel with Star Drive Aluminum pin retainers...

Hardened Steel Spur Gear (75t 48p)(Green) - Traxxas

Hot Racing light weight hardened steel 75 tooth, 48 pitch spur gear for the Traxxas Bandit, 2WD Slash, Rustler, 2WD Stampede, and Telluride vehicles. Comes with the following:- One (1) 75 tooth 48 pitch spur gear- Three (3) mounting screws- Three (3)...

Steel Universal Axles Drive Shafts: Losi Mini-T 2.0

Hot Racing optional upgrade heavy duty Steel Universal Axles Drive Shafts for Losi 2WD Mini-T2 vehicles.Requirements:- Light grease for Steel Universal Axles Drive Shafts helps maintain their longevityFeatures:Heavy duty CNC machined S2 spring steel...

Maxx Front Chassis Brace, for 1:10 Traxxas

Hot Racing aluminum front chassis upper brace (front top plate) for 1/10 TRA Mass vehicles.COMMENTS: - Replaces TRA factory plastic TRA8921 Chassis Front Upper BraceIncludes:One (1) aluminum front upper chassis braceRequired to Complete:Fastening to...

20mm Wheel Hub Extensions w/ 12mm Hex, for Axial SCX

Hot Racing 20mm wheel hub extensions with 12mm hex for the Axial SCX10, SCX10 II, and Wraith.REQUIREMENTS:- Installation- Removable thread adhesive on all screws threading into metal- 1.5mm hex wrench for screw pins- 7mm wheel nut wrench- 5mm axles with...

Aluminum Modular Motor Mount, 1/10 Traxxas Mini Maxx

Aluminum Modular Motor Mount, 1/10 Traxxas Mini MaxxFeatured product is an aftermarket RC part built to fit Traxxas® vehicles as outlined in the description. Traxxas is a registered trademark of Traxxas L.P.

Twister Motor Cooling Fan w/ Plug

Hot Racing Twister Blower Ball bearing 7 blade 40x40x28mm large cooling fan for custom cooling needs, or as a replacement for the Hot Racing AON404TP Monster Blower Fan cooling system.This is the Hot Racing Twister Blower clip-on universal heat sink and...

Aluminum 5 mm Off Set Servo Arm 25 Spline

Hot Racing double clamping servo horn (servo arm) for 25 spline (Futaba/Traxxas/Savox/Orion/ProTek) servos.Included:- One (1) 25T servo horn- One(1) M2.5x4mm socket head cap screws for clampFeatures:Lock clamp gives precise and secure fitCNC machined...