Product Description
RC4WD Trail Finder 2 Truck Kit w/1982 Toyota Pickup Hard Body
Take your adventures to the next level with the Trail Finder 2-the off-road platform that evolves with you. Built for customization, this rugged machine is fully compatible with an extensive range of upgradeable parts, allowing you to fine-tune performance and enhance its lifelike scale appearance.
From upgraded drivetrains to detailed body accessories, the Trail Finder 2 offers endless possibilities to make it truly yours. Whether you're chasing peak performance or crafting a head-turning scale masterpiece, this truck grows with your off-road ambitions.
Unleash your creativity, conquer the terrain, and experience the freedom of a truck that's as adaptable as your wildest adventures. The Trail Finder 2-where innovation meets exploration.
This is a kit that requires building time (appro. 2-3 hours)
Includes:
- 1x RC4WD Trail Finder 2 Truck Kit w/1982 Toyota Pickup Hard Body Complete Set
Required to Complete (Truck Kit):
- Hex Drivers (1.5mm, 2mm, 2.5mm)
- Long Nose Pliers
- Associated Thread Locking Adhesive
- Cross Wrench or Nut Driver (4mm, 5.5mm, 7mm)
Required to Complete (Electronics):
- Motor (35t, 45t, or 55t)
- Radio and Receiver (3 Channels or more) (3 Channel Z-R0009, or 4 Channel Z-R0006)
- 2x Twister High Torque Metal Gear Digital Servo (Z-E0035)
- Battery (Consult your "ESC" manual) Z-E0090 or Lipo battery
- Charger (Consult your battery guide) Chargers
Required to Complete (Body Kit):
- Modeling / Craft Knife
- Body Reamer
- Side Cutters
- Instant glue / Plastic Cement (prefer non whitening)
- Hex Drivers (1.5mm, 2mm)
- Cross Phillips Screwdrivers (small)
Features:
- R3 Scale Single Speed Transmission
- Center Mounted Hammer Transfer Case
- Realistic Billet Aluminum Ladder Frame Chassis
- The Ultimate Scale Shocks (60/80mm) (Chrome)
- Yota II Ultimate Scale Cast Axles V2 (XVD)
- Super Soft Flex Leaf Springs
- Stamped Steel 1.7" Beadlock SR5 Wheels (Chrome)
- BFGoodrich All Terrain K02 1.7" Scale Tires
- Marlin Crawler Side Plastic Sliders V2
- Marlin Crawler Front Winch Bumper w/Stinger V2
- Rear Plastic Tube Bumper
Specifications:
- Hammer Transfer Case: Ratio: 1.47:1; Gears: Wide .8 Mod Steel Gears; Features: 8 Bearings, Cast Casing, Hardened Gears
- R3 Scale Single Speed Transmission: Ratios: Pinion/Spur 14/64 = 1:4.57; Internal Ratio: 1.78:1; Gears: Wide Steel .8 Mod, Delrin Spur, Slipper Clutch; Features: Machined Billet Aluminum Casing, Scale Looking, Motor Mount can be adjusted with up to 10 different Positions, Compatible with other Brand Spurs (Axial, Traxxas, Robinson)
- Yota II Ultimate Scale Cast Axles: Ratio: 15/40 = 2.67:1; Width at Hex: 178.2mm (7.01")
- Trail Finder 2 Chassis: Features: Billet Aluminum Construction, Adjustable Shock Hoops
- Drive Shafts: High Quality Plastic Material, Durable Steel Yokes
- Wheels: Type: Stamped Steel 1.7" Beadlock SR5 Wheels (Chrome); Hub: 12mm Hex; Width: 23mm (0.90"); OD: 47mm (1.85")
- TF2 Truck Dimensions: Wheelbase: 284mm (11.2"); Width: 214mm (8.4"); Height: 203mm (8.0"); Ground Clearance: 45mm (1.8"); Final Drive Ratio: 31.9:1
- Bumpers: Marlin Crawler Side Plastic Sliders V2; Marlin Crawler Front Winch Bumper w/Stinger V2; Rear Plastic Tube Bumper; Authentic Looking Crawler Style Tube Bumper. Very High Quality Flexible Plastic, Very Durable, Very Scale.
- DRIVETRAIN: The R3 Single Speed Transmission comes with a tough
