Tekin

1/10 Redline Gen4 Rotor Shims Teflon (5 Front, 5 Rear)

Precision Teflon Shim Kit for GEN4 series motors. Use for setting the sensor to rotor gap and setting rotor position.TT3858 Includes:(5) .3mm thickness front shims(5) .3mm thickness rear shimsThese shims fit:25.5T GEN4 SPEC-R21.5T GEN4 SPEC-R17.5T GEN4...

1/10 RedlineS Gen4 Bearing Set

Replacement Precision bearing set for all GEN4 series motors.Includes:(1) Front 4x13x5mm Oversized Bearing(1) Rear 1/8x3/8x5/32" BearingThese bearings fit:25.5T GEN4 SPEC-R21.5T GEN4 SPEC-R17.5T GEN4 SPEC-R13.5T GEN4 SPEC-R10.5T GEN4 SPEC-R6.5T GEN4...

21.5 Gen4 Spec-R2 BL Sensored Motor

Tekin's SPEC-R2 brings next-level performance to SPEC racing classes. Improving on the original SPEC-R design, they revamped and refined the stator, rotor and materials used to increase both speed and torque while providing minimal fade during the late...

Rx8Gen3 BL ESC - 4038 T8Gen3 BL Motor 2250kV 1/8 System

Tekin's RX8 GEN3 brings bigger power handling capabilities and increased reliability to 1/8 Scale Racing. The RX8 platform has proven itself to handle the rigors of racing, while providing professional features including a programmable High Voltage BEC,...

Rx8Gen3 BL ESC - 4030 T8Gen3 BL Motor 1900kV 1/8 System

Tekin's RX8 GEN3 brings bigger power handling capabilities and increased reliability to 1/8 Scale Racing. The RX8 platform has proven itself to handle the rigors of racing, while providing professional features including a programmable High Voltage BEC,...

25.5 Gen4 Spec-R2 BL Sensored Motor

Tekin's SPEC-R2 brings next-level performance to SPEC racing classes. Improving on the original SPEC-R design, they revamped and refined the stator, rotor and materials used to increase both speed and torque while providing minimal fade during the late...

Pro Crawler Motor Rebuild Kit - Springs/Brushes

Replacement set of brushes and springs for the T-Series Pro Hand Wound Crawler Motors. Tekin recommends cutting the comm on a lathe when replacing brushes and doing a proper break-in to ensure brushes seat properly. Do not use the water break-in method,...

Rx8Gen3 BL ESC - 4030 T8Gen3 BL Motor 2050kV 1/8 System

Tekin's RX8 GEN3 brings bigger power handling capabilities and increased reliability to 1/8 Scale Racing. The RX8 platform has proven itself to handle the rigors of racing, while providing professional features including a programmable High Voltage BEC,...

Pro4 HD Rotor 5mm Shaft (Standard Rotor)

Replacement rotor for PRO4 HD brushless motors.TT2528 - 5mm Shaft

Rx8 Gen3 Case Set White

White Replacement Case for the RX8 GEN3, includes top case, bottom case, buttons and screws.

Rx8 Gen3 BL Sensored/ Sensorless 1/8 ESC

Tekin's RX8 GEN3 brings bigger power handling capabilities and increased reliability to 1/8 Scale Racing. The RX8 platform has proven itself to handle the rigors of racing, while providing professional features including a programmable High Voltage BEC,...

HD Crawler Motor Rebuild Kit - Springs/Brushes

Replacement set of brushes and springs for the T-Series HD Crawler Motors and 5 Slot Series Crawler Motors. Tekin recommends cutting the comm on a lathe when replacing brushes and doing a proper break-in to ensure brushes seat properly. Do not use the...

Pro4 HD BL Bearing Set

Replacement ABEC5 bearing set for the PRO4HD series motors.TT2525 Includes:(1) 5x14x5mm(1) 5x11x5mm

1/10 Rock Crawler Brushed Motor 55T HD

The HD "Heavy Duty" T-Series brushed motors, available in the same 35, 45 and 55 turn options as before with an upgraded ferrite magnet to get you wherever you want to go with authority. New looks, better performance and the same great Tekin quality you...

Rx4 Hardbox Waterproof BL Sensored/Sensorless D2 BL ESC

Tekin's RX4 Brushless Sensored ESC is designed to power your chassis past any obstacle. With massive power handling capabilities, a waterproof* design and all the customization features you'd expect from a Tekin ESC; the RX4 has you covered no matter the...