Upgrade Parts

Hex Set, 7075, for Losi Tenacity / Lasernut, 1pr

Precision machined alloy rear clamping 12mm hex set for the Losi 1/10 Tenacity and Lasernut line.Machined and anodized in factory gun metal, and matches the stock geometry.

Heavy Duty Spur Gear, Hardened Steel 40T, Tenacity / Lasernut

Heavy duty hardened steel 40t spur gear for the Losi 1/10 Tenacity and Lasernut line.No more melted or stripped teeth, and will last much longer than the stock plastic spur when running with high powered electronics.

Rock Baja Rey Alloy Differential Gear Case

Heavy duty diff gear case for the front, middle or rear Losi Rock or Baja Rey gear box.Includes bigger than stock steel diff screws to prevent blowing out the gear diff under heavy loads.Screws requires a quality 1.5 hobby grade hex wrench (do not use...

22S Drag Motor Plate, Slotted Lightweight

100% cnc machined and vented motor plate. Aggressive slot cuts for less weight that also helps lower the motor temps faster. The slots also help cool down the inner slipper parts by letting cooler air pass through.The extra machining brings the weight...

Slash CF Rear Body Mount, +28m Back

For the 2wd Slash drag and oval body mounting. Heavy duty carbon fiber with alloy base body mount set (requires Traxxas body post set #TRA1914R). Extends the body mount back by 28mm and out of the rear windows of most street eliminator cars. ...

Twist Nuts For M3 Thread, Orange

Twist Nuts For M3 Thread, Orange

EB410.2 HD Rear Hub Set, 7075

Heavy duty alloy rear hub set for the EB410.2 AND ET410.2Exotek has switched the ball stud to an upright angle, while still matching the stock geometry, for easier roll center adjustments by adding washers (not included), and the hubs are omnidirectional...

MIP Hex ID Collar Set, Metric 1.5MM, 2.0MM, 2.5MM and 3.0MM

Identification collars complete your MIP hex wrenches with easy to see color coded polished and anodized alloy collars.The collars are also laser etched with matching metric size labels for the most popular sized 1.5mm, 2.0mm, 2.5mm and 3.0mm hex...

1/8 Orange XL Wing Buttons 22mm (2)

Heavy duty polished and anodized alloy wing buttons for bolt on buggy wing mounts. Extra large 22mm diameter and thicker than 1/10 buttons to securely hold your wing while offering protection from crashes.Requires the use of 3mm countersunk screws, not...

Slash Bandit Titanium Front Axles, 1 pair for Street Elim.

Precision machined premium titanium front axle set for the 2wd Slash steering knuckles.At only 5.8 grams per pair (stock axles with alloy hexes are about 12gr a pair), these axles are perfect for reducing rotating mass for quicker acceleration.One piece...

Twist Nuts For M3 Thread, Black

Twist Nuts For M3 Thread, Black

EB410 Steering Cranks, 1 pair 7075 with Steel Posts

Precision heavy duty 7075 alloy steering crank set for the Tekno EB410.Reinforced alloy design eliminates the problem of the hex bearing posts stripping in the plastic cranks allowing for easier maintenance and disassembly. Includes steel bearing posts...

Fan Blaster, 30mm, Alloy Shroud for EXO1718

Alloy 30mm Fan Blaster shroud blasts your fans air directly onto your motor for maximum cooling effect, while also acting as a finned heat sink that adds additional cooling.Importantly, the shroud positions the fan about 12mm away from the motor can to...

DR10, B5, Titanium Rear CVA Axles, (1pr) Lightweight for

Super light titanium axle set for the DR10 drag racer. Reduces the weight and rotating mass of your driveline for quicker acceleration.Over 40% lighter than the stock steel axles at only 3.7gr each.*For drag racing only*

40mm Fan Bar for Exotek Fan Mount for EXO1756 & EXO1914

Replacement heavy duty fan mounting bar for attaching 40mm or 30mm fans to Exotek Fan Mounts (EXO1718, EXO1756 & EXO1914).7075 alloy construction.Exotek Fan Clamps, Fans, and M3 hardware not included.