Gears

27T PINION GEAR 48P

48 Pitch Pinion Gear, 27TOverviewThe 48 Pitch Hard Nickel Plated Alloy Steel Pinions are precision cut gears that last and last when used with a plastic spur gear. Pinions are stamped with tooth number. 1/8 inch bore. One 5-40 set screw included. 1/16...

9T PINION GEAR 32P

32P Alloy Pinion Gear, 9TOverview32 pitch alloy pinions are not heat treated and should only be used with plastic spur gears. If you only run plastic spur gears these pinions are the perfect choice. 32 pitch Alloy Pinions are not stamped with tooth...

EXTRA HARD 5M/M BORE (1.0 MODULE) PINION 25 TEETH

Extra Hard Steel 5mm Bore 1 Module Pinion, 25T

4X4mm SET SCREWS 5MM PINION(5)

4x4mm set screw(5): 5mm pinion

26T PINION GEAR 48P

48 Pitch Pinion Gear, 26TOverviewThe 48 Pitch Hard Nickel Plated Alloy Steel Pinions are precision cut gears that last and last when used with a plastic spur gear. Pinions are stamped with tooth number. 1/8 inch bore. One 5-40 set screw included. 1/16...

5/40 SET SCREWS/6 PC

Set Screws, 5-40

HARD NICKEL PLATED 48 PITCH PINION 40 TEETH

Nickel-Plated 48 Pitch Pinion Gear, 40T

5mm-1/8INCH REDUCER SLEEVE

5mm-1/8" Reducer Sleeve

HARD NICKEL PLATED 48 PITCH PINION 39 TEETH

Nickel-Plated 48 Pitch Pinion Gear, 39T

22T PINION GEAR 32P

32P Alloy Pinion Gear, 22TOverview32 pitch alloy pinions are not heat treated and should only be used with plastic spur gears. If you only run plastic spur gears these pinions are the perfect choice. 32 pitch Alloy Pinions are not stamped with tooth...

24T PINION GEAR 48P

48 Pitch Pinion Gear, 24TOverviewThe 48 Pitch Hard Nickel Plated Alloy Steel Pinions are precision cut gears that last and last when used with a plastic spur gear. Pinions are stamped with tooth number. 1/8 inch bore. One 5-40 set screw included. 1/16...

21T PINION GEAR 32P

32P Alloy Pinion Gear, 21TOverview32 pitch alloy pinions are not heat treated and should only be used with plastic spur gears. If you only run plastic spur gears these pinions are the perfect choice. 32 pitch Alloy Pinions are not stamped with tooth...

23T PINION GEAR 48P

48 Pitch Pinion Gear, 23TOverviewThe 48 Pitch Hard Nickel Plated Alloy Steel Pinions are precision cut gears that last and last when used with a plastic spur gear. Pinions are stamped with tooth number. 1/8 inch bore. One 5-40 set screw included. 1/16...

Rear Differential Cover Traxxas X Maxx

Aluminum Upper Rear Gear Box Cover: Traxxas X-Maxx Featured product is an aftermarket RC part built to fit Traxxas® vehicles as outlined in the description. Traxxas is a registered trademark of Traxxas L.P.

Aluminum front bulkhead Traxxas X Maxx

Aluminum Front or Rear Differential Housing Cover: Traxxas X-MAXX Featured product is an aftermarket RC part built to fit Traxxas® vehicles as outlined in the description. Traxxas is a registered trademark of Traxxas L.P.